SuperSoft Floss
Usage instructions for cleaning wide interdental spaces, implants, bridges and braces
►Cleaning between teeth
Take one of the stiffened ends and thread it between the teeth, slowly pulling it until the spongy middle reaches the teeth
Curve the floss around the edge of one of the teeth and using a gentle back and forth motion, slowly work the floss from top to bottom before doing the same for the other tooth
Repeat between all teeth using a fresh section of floss or take a new pre-cut strand if necessary
►Cleaning implants
Loop one of the stiffened ends around the base of the implant by threading it in one side and out the other
Taking the stiffened ends between the thumb and forefinger of both hands, gently floss back and forth around the implant
Repeat on all implants using a fresh pre-cut strand for each
►Cleaning dental bridges
Take one of the stiffened ends and thread it beneath the bridge, slowly pulling until the spongy middle reaches the gum below
Working from back to front, gently pull the floss along the bridge
Repeat on all bridges using a fresh pre-cut strand for each
►Cleaning braces
Take one of the stiffened ends and thread it between the teeth above the wire of the braces, slowly pulling it until the spongy middle reaches the teeth
Curve the floss around the edges of one of the teeth, cleaning it with a gentle back and forth motion before repeating this on the other tooth
Repeat between all teeth using a fresh section of floss or take a new pre-cut strand if necessary
TIP: you can also use SuperSoft Floss to clean the braces by threading it beneath a section of wire and gently flossing back and forth, repeating on all sections of wire.